ABSTRACT
OBJECTIVE：To study the composition and contents of flavonoids chemical components in waste material during industrialization of Pueraria thomsonii resources，and to provide reference for comprehensive development and reasonable utilization of the variety. METHODS ：Using“No. 2 Gange”of P. thomsonii from Jiangxi as objects ，UPLC-Q-TOF-MS and HPLC method were adopted to detect the components and contents of flavonoids in the root （with or without cortex ），cortex，flower， fibrous root ，stem，head and dregs （with or without cortex ）of P. thomsonii as well as dry matter of industrial wastewater （with or without cortex ）after precipitation of pueraria powder. RESULTS ：The linearity ，precision，repeatability，stability and recovery of the established method for content determination of 7 flavonoids（puerarin，daidzin，iridoxine-7-O-xylose glucoside ，genistin， iridin，daidzein and kakkalide ）were all in line with the requirements. Totally 12 kinds of flavonoids were identified ，among which the flavonoids in the root ，cortex，stem，fibrous root ，head and dregs of P. thomsonii as well as dry matter of industrial wastewater were the same ，mainly were puerarin ，daidzin，genistein，daidzein and malonyl-daidzein. The flower of P. thomsonii mainly included iridoxine- 7-O-xylose glucoside ，genistin，iridin，kakkalide，6″-O-xylosyldaidzein，but the components as puerarin ， daidzin and its aglycone were not be detected. The content of puerarin in the head of P. thomsonii was the highest （5.765％）. The contents of puerarin in root and dregs of P. thomsonii as well as dry matter of industrial waste-water in samples with cortex were all higher than in corresponding peeled sample. CONCLUSIONS ：The waste material from the industrialization of P. thomsonii resources contains a lot of flavonoids with rich species and high content ，and can be used as an important raw material for obtaining flavonoids such as puerarin.
ABSTRACT
abstract This study investigated the development and characterized the physicochemical properties of films obtained from by-products (BP) from the preparation of propolis extracts. Films were produced in the presence and absence of a polymeric adjuvant (gelatin or ethylcellulose) and propylene glycol by a solvent casting method. Density, surface topography by scanning electron microscopy, mechanical properties (folding endurance, tensile strength and percentage elongation), water vapour permeability (WVP), moisture uptake capacity, thermogravimetry, differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR) were determined. The films were a transparent, light greenish-yellow colour, with a uniform surface, and were flexible and easy to handle. The thickness and density of the preparations indicated that the compounds were homogeneously dispersed throughout the film. Mechanical properties were influenced by the film composition; films containing gelatin were more resistant to stress, while those containing ethylcellulose were more flexible. Increasing the adjuvant concentration decreased the elasticity and the rupture resistance, but increased the moisture uptake capacity and WVP of the formulations. BP was thermally stable as were the films. FTIR tests suggested interactions between BP and the adjuvants. This work could contribute to the utilization of BP to prepare films for food and pharmaceutical uses.
resumo Este estudo investigou o desenvolvimento e as características físico-químicas de filmes obtidos com o resíduo (BP), normalmente descartado, advindo da preparação de extratos de própolis. Os filmes foram produzidos com e sem adjuvantes poliméricos (gelatina ou etilcelulose) e propilenoglicol, pelo método de evaporação de solvente. Foram determinadas a densidade, a topografia de superfície usando microscopia eletrônica de varredura, as propriedades mecânicas (resistência à dobra, tensão e elongação), transmissão de vapor de água (WVP), capacidade de absorção de umidade, termogravimetria, calorimetria exploratória diferencial e espectroscopia de infravermelho com transformada de Fourier (FTIR). Os filmes demonstraram coloração verde-amarelada, transparência, uniformidade de superfície, homogeneidade, flexibilidade e fácil manuseio. A espessura e a densidade das preparações indicaram que os compostos estavam dispersos de forma homogênea. As propriedades mecânicas foram influenciadas pela composição dos filmes e aqueles que continham gelatina apresentaram-se mais resistentes enquanto os compostos por etilcelulose demonstraram maior flexibilidade. Com o aumento da concentração polimérica, a resistência e a elasticidade diminuíam, porém aumentou a capacidade de absorção de água e a WVP das formulações. BP apresentou estabilidade térmica assim como os filmes. Os testes de FTIR sugeriram interações entre o BP e os adjuvantes utilizados. Este trabalho pôde contribuir com a utilização de BP na preparação de filmes para uso alimentício e farmacêutico.
Subject(s)
Propolis/pharmacokinetics , Polymers/analysis , Gelatin/pharmacokineticsABSTRACT
background: Lactic acid (LA) is a carboxylic acid widely used as preservative, acidulant, and/or flavouring in food industry; it is also used as a raw material for the production of lactate ester, propylene glycol, 2,3-pentanedione, propanoic acid, acrylic acid and acetaldehyde. In recent years, the demand for LA production has dramatically increased due to its application as a monomer for poly-lactic acid synthesis, a biodegradable polymer used as a plastic in many industrial applications. LA can be produced either by fermentation or chemical synthesis; the former route has received considerable interest, due to environmental concerns and the limited nature of petrochemical feedstocks; thus, 90% of LA produced worldwide is obtained by fermentation, this process comprises the bioconversion of a sugar solution (carbohydrates) into LA in the presence of a microorganism. Objectives: This work is aimed at studying the effect of pH control and culture media composition on the LA production using renewable sources from the agroindustry sector. Methods: A Lactobacillus brevis strain is used to perform lab scale experiments under aerobic and anaerobic conditions, using three different culture media compositions: a high nutritional content medium (MRS), as a reference, a low nutritional content medium with glucose as the only carbon source (GM), and a potential low nutritional content medium with cassava flour as carbon source (HY1). results: The higher LA production is accomplished under anaerobic conditions, 17.6 ± 0.1, 12.6 ± 0.2 y 13.6 ± 0.2 g LA/L, for MRS, GM and HY1 medium, respectively. The effect of pH on LA biosynthesis in a 5L bioreactor is also studied using the HY1 medium. For a fermentation time of 120 h, the highest LA concentration obtained was 24.3 ± 0.7g LA/L, productivity 0.20 g/L/h, YP/S 0.32g LA/g syrup, at pH 6.5...
Subject(s)
Levilactobacillus brevis , Lactic AcidABSTRACT
Aims: Cellulosic biomass is the only foreseeable sustainable source of fuels and is also one of the dominating waste materials in nature resulting from human activities. Keeping in view the environmental problems like disposal of large volumes of cellulosic wastes and shortage of fossil fuel in the world, the main aim of the present investigation was to characterize and study the cellulolytic activity of Streptomyces albospinus (MTCC 8768), isolated from municipal wastes, on natural cellulosic substrates viz. straw powder, wood powder and finely grated vegetable peels. Methodology and Result: Stanier’s Basal broth with 100 mg of each of the substrates was inoculated separately with S. albospinus (MTCC No. 8768) and incubated at 37 °C for 8 days. The cellulosic substrates were re-weighed at an interval of 2 days and the difference between the initial weight and the final weight gave the amount of substrates degraded by the isolate. It was observed that maximum degradation was observed in the grated vegetable peels (64 mg) followed by straw powder (38 mg) and wood powder (28 mg) over a period of 8 days. Conclusion, significance and impact of study: By the selection of efficient cellulolytic microorganisms and costeffective operational techniques, the production of useful end products from the biodegradation of the low cost enormous stock of cellulose in nature can be very beneficial.
ABSTRACT
O artigo tece comentários sobre o processo de organização de duas associações de catadores de materiais recicláveis. Traz à tona a problemática da exclusão, enfatizando a necessidade de inserção dos segmentos sociais marginalizados. Focaliza, como caminho de inserção, a recriação de espaços com ambiente apropriado ao desenvolvimento da criatividade e, conseqüentemente, ao processo de emancipação social. Apresenta o Pequeno Grupo como solo provisório para existência humana, onde o poder decisório se manifesta a partir da interação dinâmica entre o singular e o coletivo.
The article describes the organizing process of two associations of waste and recyclings material pickers. The question of social exclusion emerges emphasizing therefore the urgent socially comeback of left out segments of people. It shows that the way to resocializing is the creation of environmentally approprieted spaces to develop creativity leading thus to self emancipation. The small group is seen as a transitory ground of human life, where the power to decide comes out as an interplay of individuals and collectives bodies.